Autonics CT6S-1P4, Counter/Timers (CTS/CTY/CTM Series)

Specifications  

SeriesCTS

Digit6

PresetSingle Preset

Width48 mm

Height48 mm

Length90 mm

Power Supply100-240 VAC

Allowable Voltage Range90 ~ 110% of power supply

Power ConsumptionIndicator & Single preset: Approx. 5 W, Dual preset : Approx. 6 W

Indicator : Approx. 9 VAC, Single & Dual preset : Approx. 10 VAC

Counting Speed1 cps

30 cps

5 kcps

0 kcps

10 kcps

Prescale Range0.001 - 99.999

Min. Input Signal Width Counter ResetReset input: Selectable 1 ms or 2 ms

Min. Input Signal Width Timer ResetINA, INHIBIT, RESET : Selectable 1 ms or 20 ms

InputVoltage input. No voltage input (PNP, NPN selectable)

[Voltage input] Input impedance : 5.4 kΩ, "H" level : 5 - 30 VDC, "L" level : 0-2 VDC

[No voltage input] Impedance at short-circuit - Max. 1 kΩ, Residual voltage at short-circuit : Max 2 VDC, Impedance at open-circuit : Min. l00 kΩ

One-Shot Output10 ms

100 ms

1000 ms

200 ms

2000 ms

50 ms

500 ms

5000 ms

Contact OutputSingle preset type : SPDT(1c)

Contact CapacityNC: 250 VAC 2 A at resistive load

NO: 250 VAC 3 A at resistive load

Solid State OutputSingle preset type: 1 NPN open collector

Solid-State CapacityMax. 100 mA

Max. 30 VDC

Memory Protect10 years (When using nonvolatile semiconductor memory)

External Sensor Power12 VDC ±10%, Max. 100 mA

Time Accuracy (Repeat Error)Power ON start : Max. ±0.01% ±0.05 sec.

Signal start : Max. ±0.01% +0.03 sec.

Time Accuracy (Set Error)Power ON start : Max. ±0.01% ±0.05 sec.

Signal start : Max. ±0.01% +0.03 sec.

Time Accuracy (Voltage Error)Power ON start : Max. ±0.01% ±0.05 sec.

Signal start : Max. ±0.01% +0.03 sec.

Time Accuracy (Temperature Error)Power ON start : Max. ±0.01% ±0.05 sec.

Signal start : Max. ±0.01% +0.03 sec.